CBIL
CBIL
Petroleum & Energy

Specialty Resins & Cellulose Derivatives: Acrylic Emulsions, PVA & VAE, PVOH, Silicones, Hydrocarbon Resins, CMC & HPMC

Acrylic and vinyl emulsions, PVOH, silicones, hydrocarbon resins and cellulose ethers, bought on the grade sheet

Specialty resins are bought on a data sheet, not on a tonnage. Acrylic emulsions are the binders of latex paints and water-based pressure-sensitive adhesives, matched on solids, Tg and MFFT, and PMMA resin is extruded into acrylic sheet or moulded into lenses; polyvinyl acetate emulsion is wood and paper glue, VAE is sold as dispersions and as the powders that bind dry-mix mortars, and polyvinyl alcohol is graded on degree of hydrolysis and 4% solution viscosity; silicones run from PDMS fluids to solid, liquid and RTV silicone rubber and the bases sealant makers compound; hydrocarbon resins are the C5, C9, DCPD and hydrogenated tackifiers and binders of hot-melt adhesives, road-marking paint, rubber and inks, sold on ring-and-ball softening point and Gardner colour; and CMC and HPMC are the cellulose ethers of detergents, drilling fluids, tile adhesives, food and tablets. CBIL is a commodity brokerage company and brokers acrylic polymers (HS 3906.10 and 3906.90), vinyl acetate polymers and PVOH (HS 3905.12, 3905.21, 3905.29 and 3905.30), silicones (HS 3910.00), petroleum resins (HS 3911.10) and cellulose ethers (HS 3912.31 and 3912.39) against the producer's certificate of analysis, safety data sheets, certificates of origin, REACH statements for EU imports, where polymers are exempt from registration, and US 21 CFR food-contact declarations where the end use needs them. The 2024 export declarations put HS 3910.00 silicones at about USD 6.61 billion, with China at USD 1.45 billion and the USA at USD 1.39 billion; HS 3912.39 cellulose ethers at USD 2.98 billion, led by Germany at USD 749 million; HS 3911.10 petroleum resins at USD 2.04 billion, led by China at USD 675 million; HS 3906.10 PMMA at USD 1.29 billion, led by Korea at USD 286 million; HS 3905.30 polyvinyl alcohol at USD 1.27 billion, led by China at USD 367 million; and HS 3912.31 CMC at USD 1.05 billion, led by China at USD 280 million.

Trade remedies shape some routes: the USA has kept anti-dumping duty orders on polyvinyl alcohol from Japan and China since 2003, the EU has applied anti-dumping duties on certain polyvinyl alcohols from China since 2020 with an expiry review opened in September 2025, India has applied anti-dumping duty on silicone sealants from China since December 2021, and Korea opened an anti-dumping investigation into petroleum resins from China and Taiwan in August 2024; the duty at destination is checked for each route before an origin is fixed. Emulsions and fluids move in drums and IBCs, and resins, powders and cellulose ethers in 25 kg bags, in containers on FOB, CFR and CIF terms. Vinyl acetate monomer is on the petrochemicals page; polyethylene, polypropylene, PVC, PET, polystyrene, ABS, polycarbonate, nylon 6 and MDI/TDI are on the polymers page; and guar gum and its oilfield derivatives are on the gums and hydrocolloids page. Pricing is per MT on grade, pack and origin, and minimum quantities are confirmed per product and pack. Send the product, grade limits, end use, pack, monthly volume and discharge port.

Excluded origins are not offered, including product re-exported, blended or re-processed through a third country. Every lot moves with a certificate of origin naming the producing plant, mine or grower country, and nothing is quoted before the seller and loading point are known.

Indicative reference

Per MT, on grade and pack USD / MT

as at September 2026

IncotermsFOB · CFR · CIF
OriginsChina, USA, Germany, Korea, Japan, Taiwan, Singapore, Netherlands, France, Belgium, Finland, Türkiye, Thailand, United Kingdom
PackagingEmulsions and fluids in drums or IBCs; resins, powders and cellulose ethers in 25 kg bags; in 20-ft and 40-ft containers

Reference level only — not an offer, and reviewed quarterly. Levels shown are as at September 2026. Firm pricing is quoted per RFQ, subject to volume, terms and inspection.

China · USA · Germany · Korea · Japan · Taiwan · Singapore · Netherlands · France · Belgium · Finland · Türkiye · Thailand · United Kingdom

Products in this range

Specialty Resins & Cellulose Derivatives: Acrylic Emulsions, PVA & VAE, PVOH, Silicones, Hydrocarbon Resins, CMC & HPMC we source and broker

Each product below is supplied to its own specification and grading. Open one for full specs, grades and typical applications — or send an RFQ covering several at once.

Redispersible Polymer Powder (RDP) & Construction HPMC

Vinyl acetate-ethylene (VAE) dispersible polymer powder & cellulose ethers for tile adhesives and dry-mix mortars

Standard Tile Adhesive Grade RDP (C1/C2 EN 12004 compliance)High-Flexibility RDP (for deformable S1/S2 tile adhesives & ETICS)
View specifications

Acrylic Emulsions & PMMA Resin (Styrene-Acrylic, Pure Acrylic & Sheet-Grade PMMA)

Styrene-acrylic and pure acrylic binders for paints and adhesives, and PMMA pellets for extruded sheet

Pure Acrylic Emulsion (exterior paint binder)Styrene-Acrylic Emulsion (paint binder)
View specifications

PVA & VAE Emulsions, Redispersible Powders & Polyvinyl Alcohol (PVOH)

Polyvinyl acetate glue emulsions, VAE dispersions and powders, and PVOH by hydrolysis and viscosity

PVAc Homopolymer Emulsion (wood and paper glue)Water-Resistant PVAc Wood Glue Emulsion (D3 level)
View specifications

Silicones: PDMS Fluids, HTV, LSR & RTV Silicone Rubber and Sealant Bases

Dimethyl silicone fluids by viscosity, solid and liquid silicone rubber, and RTV systems for sealant makers

PDMS Silicone Fluids, low to high viscosityFood-Grade Dimethylpolysiloxane (defoamer use)
View specifications

Hydrocarbon Resins: C5 Aliphatic, C9 Aromatic, DCPD & Hydrogenated

C5, C9, C5/C9 and DCPD petroleum resins by ring-and-ball softening point and Gardner colour

C5 Aliphatic Resin, rubber tackifier (SP 96–103 °C)C5 Road-Marking Grade (SP 100 ± 5 °C)
View specifications

CMC & Cellulose Ethers (Detergent, Food & Drilling-Grade CMC and HPMC)

Sodium CMC in technical, purified and drilling grades, and HPMC for construction, pharma and food

Technical CMC for detergentsPurified Food-Grade CMC (E466)
View specifications

Epoxy Resin (Liquid DGEBA EEW 184-190, Solid Type 1, Solution Grades & Hardeners)

Bisphenol-A liquid epoxy resin at EEW 184-190, solid and 75% solution grades, and the amine, polyamide, anhydride and dicyandiamide hardeners that cure them

Liquid DGEBA, EEW 184-190 g/eq (D.E.R. 331 / NPEL-128 / YD-128 type)Solid Type 1 Epoxy, EEW 450-500 g/eq (NPES-901 / YD-011 type)
View specifications

PCE Superplasticiser (Liquid 40-50% & Powder) and Calcium / Sodium Lignosulphonate

Polycarboxylate ether high-range water reducers and lignosulphonate plasticisers for ready-mix, precast and admixture blenders

PCE Mother Liquor 40% solids (HS 3824.40)PCE Mother Liquor 50% solids
View specifications

Typical Specification

EmulsionsSolids, Tg and MFFT per producer TDS and COA
PVOH80.0–99.9 mol% hydrolysis · 3–61 mPa·s (4%, 20 °C) by grade
Hydrocarbon ResinsRing-and-ball softening point (ASTM E28), Gardner colour
Silicone RubberAbout 10–100 Shore A by grade
Food CMC (US)≥ 99.5% dry basis (21 CFR 182.1745)
DocumentsCOA, SDS, certificate of origin, REACH statement for EU, food-contact declarations

Specifications are indicative and adjusted to the agreed contract and destination requirements. Final spec confirmed on COA / SGS.

Available Grades

Styrene-Acrylic & Pure Acrylic Emulsions · PMMA ResinPVAc & VAE Emulsions · VAE Dispersible PowdersPolyvinyl Alcohol (PVOH), partially & highly hydrolysedPDMS Fluids · HTV, LSR & RTV Silicone RubberC5, C9, C5/C9, DCPD & Hydrogenated Hydrocarbon ResinsCMC (technical, food, drilling) · HPMC

Applications

  • Paints & coatings
  • Hot-melt, pressure-sensitive & packaging adhesives
  • Dry-mix mortars & tile adhesives
  • Building sealants & silicone rubber parts
  • Road-marking paint, rubber & printing inks
  • Detergents & drilling fluids
  • Food, tablets & capsules
  • Textile sizing, PVB & water-soluble film

Category

Petroleum & Energy

Incoterms

FOB · CFR · CIF

Pricing basis

USD / MT

Inspection

SGS / Intertek at load port

Specialty Resins & Cellulose Derivatives: Acrylic Emulsions, PVA & VAE, PVOH, Silicones, Hydrocarbon Resins, CMC & HPMC — buyer questions

Which specialty resin systems are brokered by CBIL?

Waterborne acrylic and styrene-acrylic emulsions for architectural coatings, redispersible polymer powders (RPP/RDP) and vinyl acetate-ethylene (VAE) copolymer emulsions for dry-mix tile mortars, polyvinyl alcohol (PVOH) for sizing, petroleum hydrocarbon resins (C5/C9) for hot-melt adhesives, and cellulose ethers (HPMC/CMC) for rheology control.

What testing certifies redispersible polymer powder (RDP) quality?

RDP quality is governed by minimum polymer solids content (98% min), protective colloid ash content (10-14% anti-caking mineral filler), minimum film-forming temperature (MFFT), glass transition temperature (Tg), and tensile adhesion strength on concrete tiles according to EN 12004.

How are moisture-sensitive cellulose ethers and RDP packaged?

RPP powders, HPMC and CMC are packed in multi-ply moisture-barrier paper bags of 25 kg with inner polyethylene liners, palletized and shrink-wrapped (approx. 14 to 18 MT per 20ft dry container), with desiccant packs for ocean transport.

Ready to source Specialty Resins?

Send your quantity, preferred Incoterms and destination port. Qualified requirements receive a workable offer against verified supply.

Have Specialty Resins to sell? Submit an offer — we'll match it against live buyer demand.

Planning to import Specialty Resins into a new market? Commission a market study.

Related commodities